|
 |
|
| Double Flat Panel Plasma Display Case (A case to hold 2 displays) |
|
Below are some pictures of a case to hold
two 42" plasma displays. This case is based on our "case within a case"
design and can be modified to accommodate any two 40"-42" monitors: they do not
have to be alike. To keep the case from becoming too wide, the case shown here does not
allow for the stands to be shipped attached to the monitors. We can however manufacture a
case to accommodate the stands if needed. Additionally, a case can be manufactured in a
large version of this layout to accommodate two 50" displays. Remember, this is just
a starting point to show you what has been done in the past. If you are interested in a
different configuration, or need a case to accommodate more than two monitors, please give
us a call at 888-883-0107 to discuss the matter with one of our case professionals.
|
|
| The exterior case is highlighted by a
3/8" side wall, recessed handles and spring-loaded locking twist-lock latches,
stamped nickel-plated steel ball corners, and locking casters. The outside dimensions of this case in the 42" version run
approximately 54(L) X 47(H) X 35(W) with a weight of approximately 260 lbs. |
 |
|
 |
This view shows the back side of the case
with the lid to the storage compartment hinged open. |
|
The view below shows the case with the main
section of the case hinged open, exposing the lids of the interior cases.
 |
|
 This view shows the lids of the interior cases removed, exposing
the foam lined cases were the displays ride. The inner cases float independently from the
exterior shell, protecting the monitor from the abuse the outer case endures in shipment. |
|
|
|
|
|
| CLICK
HERE to request a quote on a Plasma Display Case |
|
|
